News

BEKO TECHNOLOGIES introduced the METPOINT BDL data logger, Now it´s little brother“, the METPOINT BDL compact, is released.

The METPOINT® BDL compact data logger allows for the connection of 2 - 4 transducers or sensors in a user-defined manner. With pressure transducers, for example, or with pressure dew point transmitters, volume-flow sensors, temperature sensors, clip-on ammeters, etc. Four limit values on the whole can be freely defined and assigned to two different alarm relays.

At the device, the measured values are indicated on a 3.5" colour display with a zoomable touch panel. It allows for tabular, graphic, and combined presentations. Saving potentials become transparent via daily, weekly, and monthly reports. Any exceeded limits are highlighted in red. An early detection of deviation from set parameters secures highest precision and process safety.

BEKO TECHNOLOGIES are pleased to announce that from 1st January 2015 we are offering an extended 5 year warranty as standard with the DRYPOINT RA refrigeration dryers. In addition to this we will not be increasing our prices on the dryers this year.

We believe that our DRYPOINT RA refrigeration dryers are reliable, perform well to different specifications and are easy to maintain via good information from the control system, and also give customers the lowest cost of ownership. They are also environmentally friendly with the R407C refrigerant which has significantly lower GWP ( Global Warming Potential) and are low in energy consumption.

With a data logger which was specifically developed for the employment in compressed-air plants BEKO Technologies extends its METPOINT® measurement equipment family. The new device boasts a multitude of application-specific capabilities, stretching from the number of connectable transducers to software specifically for the analysis of compressed-air processing.

The METPOINT® BDL data logger allows for the connection of up to eight or even 12 transducers or sensors, depending on the model. With this capacity the new device distances itself from standard data loggers which, in most cases, do not allow for such an option.

Sensors combined in a user-defined manner can be assigned to the numerous connections of the METPOINT® BDL. With pressure transducers, for example, or with pressure dew point transmit-ters, volume-flow sensors, temperature sensors, clip-on ammeters, etc. 32 limit values on the whole can be freely defined and assigned to four different alarm relays. An automatic early warning guarantees the utmost precision and process safety. At the device, the measured values are indicated on a 7" colour display with a zoomable touch panel.

BEKO TECHNOLOGIES introduced the METPOINT BDL data logger, Now it´s little brother“, the METPOINT BDL compact, is released.

The METPOINT® BDL compact data logger allows for the connection of 2 - 4 transducers or sensors in a user-defined manner. With pressure transducers, for example, or with pressure dew point transmitters, volume-flow sensors, temperature sensors, clip-on ammeters, etc. Four limit values on the whole can be freely defined and assigned to two different alarm relays.

At the device, the measured values are indicated on a 3.5" colour display with a zoomable touch panel. It allows for tabular, graphic, and combined presentations. Saving potentials become transparent via daily, weekly, and monthly reports. Any exceeded limits are highlighted in red. An early detection of deviation from set parameters secures highest precision and process safety.

BEKO TECHNOLOGIES announces the launch of its own official YouTube Channel. This channel showcases videos about our company and about the products from our compressed air treatment and compressed air measurement portfolio. We are excited that we now feature a leading social media platform in our company communication. Viewers are invited to give us their feedback in the comments.

Link to the English channel:
https://www.youtube.com/channel/UCoC6z7J7XfVw9fTH3YBMEsg

An important contribution to the environment - recycling service-units of BM31U / BM32U / BM33U

BEKOMAT is by far the most successful electronic level controlled condensate series - and that for a good reason. It represents the benchmark for all global competitors. This does not only apply to the reliability. In particular, the sustainability aspects throughout the entire life cycle are world leading:

Design: All wearing parts are housed in a service-unit. The replacement requires only 10% of the time that would be required for a device in which the items would have to be replaced individually. The service-unit is 100% pressure and functionally tested. Effectively, after each service-unit change you have a new unit! This saves personnel resources, reduces downtimes to a minimum and increases reliability.

World’s First 4G ATEX Zone 1 Smartphone Now Shipping!
 
The Smart-Ex 01 from ecom instruments is an ultra-rugged ATEX Zone 1 smartphone and is the first to run the latest Android 4.4 Kit Kat operating system. With this device, engineers can scan an RFID tag or barcode, capture inspection data, communicate with colleagues and take high quality pictures using just one device.

Using the Smart-Ex 01, an engineer can collect data (Read More) 

Dialight Enhances its Emergency Linear Fixture Range with a Stainless Steel One-Piece Design

Emergency linear range with new one-piece housing design delivers three hours of illumination in battery backup for superior safety and reliability in industrial and hazardous areas

Dialight, the innovative global leader in LED lighting technology, today introduced the emergency version of its SafeSite and DuroSite Stainless Steel Linear fixtures with a new one-piece design. (Read More) 

Nederman Launches New Media Filtration System

To control light airborne dust/smoke in potentially hazardous environments, Nederman has now developed its new MF 12-15media filtration system.

The cost effective solution has been designed for free hanging applications to control light airborne particulate. The new MF12-15 units are ideal for applications that include the removal of diesel smoke, grinding dust, welding fumes and other airborne contaminants. (Read More)

CompEx and Specialist Ex Training and Free Seminars for 2015 from ExVeritas

ExVeritas are a CompEx licenced centre and one of only a couple of centres worldwide that can present ‘Ex12’ for Designers, the highest level of CompEx training available and only ever uses senior working practitioners to present training, all of whom have at least 20 years’ experience.

They are also the only training facility to run specialist courses such as ‘Intrinsically Safe circuit design for electronics (Read More)